EM-E Ceiling Fan

SKU: EM-E Category:



Colours Available :


The EM-E is a 38″ (956mm) four bladed ceiling fan, designed for smaller rooms and/or tighter spaces. It has its own accessory light kit which has been designed to complement the lines of the fan. The light kit comes with an efficient 14w GX53M light or 100w Halogen or an E14 assembly which provides excellent lighting with optimal energy efficiency.

Installing Location:
EM-E ceiling fans are recommended for indoor use only.

Blade Pitch:
The blade pitch is 12 degrees allowing the fan to produce greater air flow.

If the distance between the ceiling fan and the floor is greater than 2.4m (8ft), please see the accessories section for extended down rod solutions.



The EC02 is a 1320mm (52 inch) four bladed sweep fan. Entirely Australian designed, the die-cast aluminium housing is attractive, light weight and robust. The blades are a new aerofoil design created by Hunter Pacific International in Sydney which provide high airflow for lower energy input when compared to conventional flat paddle timber blades.

A custom wound high efficiency motor uses less power to provide better airflow than similar sized fans with standard motor designs that are turning traditionally shaped blades. To even further reduce energy consumption and running cost EC02 is supplied with an additional set of wall speed control capacitors. These additional capacitors provide super economy by reducing the power on medium and low speed from 26W and 13W to 19W and 7W respectively.*

The fan is suitable for raked ceilings up to 28 degrees (accessory kit available for up to 45 degrees). It comes with a 2 year ‘In- Home’ warranty and a further 3 years parts only warranty for the motor.

The EcO2 can be connected to building automation systems that have relay control modules. It is not recommended to connect to electronic fan speed controllers. The supplied wall switch is designed to suit most Australian wall plates (wall plate not included).

*Note, when the fan is connected to remote controls energy comsumption is determined by the components in the remote control receiver and these figures do not apply.

Light adaptable (accessory kit available) and is available in 3 colours.